SUGON T3602 Soldering Station JBC C115 C210 Double Station Welding Rework Statio

  

SUGON T3602 Soldering Station JBC C115 C210 Double Station Welding Rework Station. Input Voltage: AC 110V / AC 220V 50/60Hz.

Range of Temperature: Decide by working mode200? /Without air flow and no load.

HOW TO AVOID DEVIATION OF TEST TEMPERATURE. Do not add too much tin at the test point. Appropriate amount of tin and flux must be added to thetest point. The test point must be integrated with the soldering iron tip. The positive and negative poles of the K-type thermocoupleof the.

Temperature tester cannot be installed wrongly. Increase the contact area between the soldering iron tipand the. T3602 needs less than 5% power to maintain a constant temperature of 300 degrees Celsius. The use of low power can extend the life of the soldering iron tip and reduce the consumption of the soldering iron tip. This is the careful design of sugon.